How To Reset Tire Pressure Sensor Chevy Silverado 2013 2021. Remove the valve cap from the tire’s valve stem. This will generally reset your flashing tire pressure light, which you should notice the next time you turn on your car.
Start the vehicle and let it run for 20. Start the vehicle and drive. With the engine off, turn the ignition key to the run position.
Table of Contents
Assemble The Tire Pressure Sensor (2) To The Valve Stem.
Activate the tpms sensor by increasing or. Here’s the simple way to do it with a silverado, and the way that usually works: Start from the driver side.
Drive At Or Over 50 Mph For About 10 Minutes Or More.
Once your tires have been inflated to the recommended psi air pressure levels, drive 50mph for at minimum, 10mins. Identify the type of tpms. Turn the ignition to “on/run” position, with the engine “off”.
Instruction On How To Reset And Relearn The Tpms On Chevy Cars.
If your chevy is not equipped with the driver information cluster, press and hold the odometer reset until the “tire learning active” message displays; The first step you need to perform is to identify whether your vehicle possesses a direct tpms or indirect tpms. Learn how to clear / reset / remove tpms tire pressure monitor system light.
Remove The Valve Cap From The Valve Cap Stem.
4pc oem tire pressure monitoring sensor for chevrolet impala silverado1500 hhr; With the engine off, turn the ignition key to the run position. Then press the button to activate the tpms sensor.
This Should Automatically Reset The Tpms Light.
Put the key in the ignition and turn on the battery but don’t start the car. Using the dic, press the vehicle information button until the relearn tire positions message. Use the vt56 or vt46 branded tools to change placard pressure.